Controls for Ranger Proximity ReadersLong distance identification for parking applications.
Highpower's WRT-4+ tag is a four button credential for the Ranger Reader, though it also works as a proximity card for all of our standard proximity readers.
The WRT-4+ design is similar to a remote control, and the unit is furnished with a key ring. Pressing a button operates the long-range capability of the tag, transmitting a 433 MHz signal, which is powered by a replaceable 12V battery. If the tag is presented to a standard proximity reader it transmits a 125 KHz signal to the reader, just like a normal proximity card, without pressing the button. The remote will transmit the low frequency signal even when the battery is discharged. The battery is a standard remote control battery and is user replaceable.
The remote features quality, long life switches in this remote. Despite this, the four buttons provide redundancy in the case where one of the buttons fails. Buttons 1 and 2 transmit the card ID through output 1 of the Ranger reader/receiver. Buttons 3 and 4 also transmit the card ID through output 2 on the Ranger receiver. This feature gives you flexibility in that you can use one Ranger remote to control two parking gates with just one Ranger reader/receiver. The 433 MHz long distance signal used by the Ranger system is an encrypted rolling code for high security that is difficult to hack. Since the long-range transmission is powered by a battery, instead of using unreliable passive technology, the unit works reliably in most all environments and installation types.
might also need:
Swipe and proximity
cards that signal
and open a door.
Required for safety codes,
they keep the door
unlocked for a set
amount of time
in case of an
All the items needed for
card swipe 2-door
from cards to
All the items for single door control access,for use
Call us at 1-800-991-3646
- Long-range, active and reliable push-button control for parking applications
- Short-distance proximity card functionality for use with standard readers
- Redundant button sets ensure reliability and offers two functions on one remote
- High-quality, durable button switches and construction
- User replaceable 12V battery
- Reliable operation in a variety of installations and environments